10 Degrees on one side, 20 degrees on the other produce an off-center ridge. Available 4-9mm wide. (Usually ships in 10-14 days)
Size (Sizes are U.S.) - Please Select - 3 3.25 3.5 3.75 4 4.25 4.5 4.75 5 5.25 5.5 5.75 6 6.25 6.5 6.75 7 7.25 7.5 7.75 8 8.25 8.5 8.75 9 9.25 9.5 9.75 10 10.25 10.5 10.75 11 11.25 11.5 11.75 12 12.25 12.5 12.75 13 13.25 13.5 13.75 14 14.25 14.5 14.75 15 15.25 15.5 15.75 16 16.25 16.5 16.75 17
Width - Please Select - 4mm 5mm 6mm (2mm minimum thickness recommended) 7mm (2mm minimum thickness required) 8mm (2.25mm minimum thickness recommended) 9mm (2.5mm thickness recommended)
Ring Thickness (Click for examples) - Please Select - 1.75mm (Thinner for narrow rings) 2.00mm (Standard thickness) 2.25mm (Thicker ring) 2.50mm (Extra thick)
Surface Finish (Click for examples) - Please Select - Brushed - Subtract $10 Polished
Inside Engraving No engraving 1mm capital block letters - Add $10 2mm capital block angled letters - Add $10 Engraving text (must select engraving above) characters left
Available characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 - & ' .,/
*If all 35 spaces are used the first and last letters will be right next to each other **Rings smaller than size 6 are limited to 28 spaces with the 2mm font
